As shown in, Figure 393 – H3C Technologies H3C MSR 50 User Manual
Page 413
28
d.
Enter IP address 10.1.1.1.
e.
Select IP mask 24 (255.255.255.0).
f.
Click Apply.
Figure 393 Configuring interface Ethernet 0/0
2.
Configure an IP address for interface Ethernet 0/1, the physical interface of the tunnel:
a.
Click the
icon for interface Ethernet 0/1.
b.
Select Manual for Connect Mode.
c.
Enter IP address 1.1.1.1.
d.
Select IP mask 24 (255.255.255.0).
e.
Click Apply.
This manual is related to the following products: