H3C Technologies H3C MSR 50 - Manual (Page 442)

57
Item Description
Enable public
account
Select this item to set the local user account as a public account. A public account can
be concurrently used by multiple users to log in to the SSL VPN system.
If you do not select this item, only one user can use the local user account to log in to the
SSL VPN system at a time.
Max Number of
Users Set the maximum number of concurrent users that can log in to the SSL VPN system by
using the public account.
User Status Select a user status, which can be Permitted, Permitted When Valid, and Denied.
Expiry Date Set the expiry date for the user when the user status is set to Permitted When Valid.
MAC Address
Specify the MAC addresses to be bound with the
username. The MAC addresses are used for user identity
authentication. IMPORTANT:
To implement the two
functions, you must also
enable the MAC address
binding function in the
domain policy (see
"
Configuring the domain
policy ").
Enable MAC
address learning
Select this item to enable MAC address learning.
With this function enabled, when a user uses this user
account to log in, the SSL VPN system automatically learns
the MAC address of the user host and records the MAC
address for the account. The SSL VPN can record up to
three MAC addresses for an account. The recorded MAC
addresses are still effective after you disable the MAC
address learning function.
Selected User
Groups
Specify the user groups to which the local user belongs.
Available User
Groups
Importing local users in bulk
1. Select VPN > SSL VPN > User Management > Batch Import from the navigation tree.
The batch import page appears.
2. Click Browse to locate the local file that saves the user information.
3. Set whether to directly overwrite the file with the same name on the device.
4. Click Apply to import local users from the file into the SSL VPN.