H3C Technologies H3C MSR 50 User Manual
Page 352
331
b.
Configure the region name as example.
c.
Set the revision level to 0.
d.
Select the Manual radio button.
e.
Select 1 from the Instance list.
f.
Set the VLAN ID to 10.
g.
Click Apply to map VLAN 10 to MSTI 1, and add the VLAN-to-instance mapping entry to the
VLAN-to-instance mapping list.
h.
Repeat the preceding steps to map VLAN 30 to MSTI 3 and VLAN 40 to MSTI 4, and then add
the VLAN-to-instance mapping entries to the VLAN-to-instance mapping list.
i.
Click Activate to end the operation.
Figure 334 Configuring an MST region on Router A
# Enable MSTP globally and configure the current device as the root bridge of MSTI 1:
a.
From the navigation tree, select Advanced > MSTP > Global.
b.
On the page that appears (see
), select Enable from the Enable STP Globally list.
c.
Select MSTP from the Mode list.
d.
Select the box in front of Instance.
e.
Set the Instance ID field to 1.
f.
Set the Root Type field to Primary.
g.
Click Apply to submit the settings.