Verifying the configuration – H3C Technologies H3C MSR 50 User Manual
Page 481
96
Figure 479 Configuring RADIUS scheme named system
3.
Enable RADIUS authentication for the SSL VPN domain:
a.
Select VPN > SSL VPN > Domain Management > Authentication Policy from the navigation
tree.
b.
Click the RADIUS Authentication tab.
c.
Select the box before Enable RADIUS authentication.
d.
Click Apply.
Figure 480 Enable RADIUS authentication
Verifying the configuration
Launch a browser on a host, and enter https://10.1.1.1/svpn/ in the address bar to enter the SSL VPN
login page, as shown in
. You can see that RADIUS authentication is the default authentication
method and a verification code is needed for login.
This manual is related to the following products: