H3C Technologies H3C MSR 50 - Manual (Page 768)

383
Configuring SIP local survival
Service configuration
Select Voice Management > SIP Local Survival > Service Configuration from the navigation tree to
access the page as shown in Figure 767 .
Figure 767 Configuring service
Table 280 Configuration items
Item Description
Server Running State
• Enable—Enable the local SIP server.
• Disable—Disable the local SIP server.
By default, the local SIP server is disabled.
IP Address Bound to the
Server
Enter the IP address of the local server, which can be a local interface's IP address,
or a loopback address such as 127.0.0.1. The IP address of a local interface is
recommended because a loopback address cannot accept registrations from
remote users.
When the local SIP server is enabled, the IP address of the local server must be
provided.
Port Bound to the Server Enter the port number of the local SIP server.
Registration Aging Time
of the Client
Enter the maximum registration interval of clients.