Enabling the sip trunk function, Configuring a sip server group, Creating a sip server group – H3C Technologies H3C MSR 50 User Manual
Page 703
318
Task Remarks
Configuring advanced settings of the call
route of a SIP trunk account
Optional.
Configuring a call route for inbound calls
Required.
Enabling the SIP trunk function
Select Voice Management > SIP Trunk Management > Service Configuration from the navigation tree.
Figure 711 Configuring services
Table 261 Configuration item
Item Description
SIP Trunk Function
Enable the SIP trunk function before you can use other SIP trunk functions. H3C
recommends not using a device enabled with the SIP trunk function as a SIP UA.
•
Enable.
•
Disable.
By default, the SIP trunk function is disabled.
Configuring a SIP server group
Creating a SIP server group
Select Voice Management > Call Connection > SIP Server Group Management from the navigation tree.
On the server group configuration page that appears, create a SIP server group.
Enabling the real-time switching, keep-alive, and redundancy functions
•
Select Voice Management > Call Connection > SIP Server Group Management from the navigation
tree. On the server group configuration page that appears, configure the real-time switching and
keep-alive functions.
•
Select Voice Management > Call Connection > SIP Connection from the navigation tree, and click
the Advanced Settings tab, where you can specify the redundancy mode.
For more information about how to configure a SIP server group, real-time switching, and keep-alive
function, see "Managing SIP server groups."
For more information about how to configure the redundancy function, see "Configuring SIP
connections."