H3C Technologies H3C MSR 50 - Manual (Page 52)

31
Ethernet interface
Figure 18 Setting Ethernet interface parameters
Table 10 Configuration items (in auto mode)
Item Description
WAN Interface Select the Ethernet interface to be configured.
Connect Mode: Auto Select the Auto connect mode to automatically obtain an IP address.
MAC Address
Specify the MAC address of the Ethernet interface in either of the two ways:
• Use the MAC address of the device—Use the default MAC address of the
Ethernet interface, which is displayed in the brackets.
• Use the customized MAC address—Assign a MAC address in the field to the
Ethernet interface.
Table 11 Configuration items (in manual mode)
Item Description
WAN Interface Select the Ethernet interface to be configured.
Connect Mode: Manual Select the Manual connect mode to configure an IP address.
TCP-MSS Set the maximum TCP segment length of an interface.
MTU Set the MTU of an interface.
IP Address Specify the IP address of the Ethernet interface.
Subnet Mask Select a subnet mask for the Ethernet interface.
Gateway Address Configure the next hop of a static route.
DNS1
Specify a DNS server IP address for the interface. Note that DNS server 1 is used
before DNS server 2.