Configuring data transmit rates, Configuring 802.11a/802.11b/802.11g rates – H3C Technologies H3C MSR 50 User Manual
Page 135
114
Item Description
Long Retry Threshold
Number of retransmission attempts for unicast frames larger than the RTS
threshold.
Short Retry Threshold
Number of retransmission attempts for unicast frames smaller than the RTS
threshold if no acknowledgment is received for it.
Max Receive Duration
Interval for which a frame received by a device can stay in the buffer memory.
Configuring data transmit rates
Configuring 802.11a/802.11b/802.11g rates
Select Interface Setup > Wireless > Radio from the navigation tree, and click the Rate tab.
Figure 110 Setting 802.11a/802.11b/802.11g rates
Table 61 Configuration items
Item Description
802.11a
Configure rates (in Mbps) for 802.11a.
By default:
•
Mandatory rates—6, 12, and 24.
•
Supported rates—9, 18, 36, 48, and 54.
•
Multicast rate—Automatically selected from the mandatory rates. The
transmission rate of multicasts in a BSS is selected from the mandatory rates
supported by all the clients.