H3C Technologies H3C MSR 50 - Manual (Page 295)

274
Figure 275 Traps configuration
2. Click Add to enter the Add Trap Target Host page, as shown in Figure 276 .
Figure 276 Adding a target host of SNMP traps
3. Configure the SNMP traps, as shown in Table 129 .
Table 129 Configuration items
Item Description
Destination IP Address
Set the destination IP address.
Select the IP address type: IPv4/domain name or IPv6, and then
type the corresponding IP address or domain name in the field
according to the IP address type.
Security Name
Set the security name, which can be an SNMPv1 community
name, an SNMPv2c community name, or an SNMPv3
username.