H3C Technologies H3C MSR 50 - Manual (Page 477)

92
Figure 474 Adding local user usera
2. Configure user group user_gr1, assign resource group res_gr1 to the user group and add local
user usera to the user group:
a. Select VPN > SSL VPN > User Management > User Group from the navigation tree to enter the
user group list page.
b. Click Add.
The user group configuration page appears, as shown in
Figure 475 .
c. Enter the user group name user_gr1.
d. Select res_gr1 on the Available Resource Groups list and click << to add it to the Selected
Resource Groups list.
e. Select usera on the Available Local Users list and click << to add the user to the Selected Local
Users list.
f. Click Apply.