H3C Technologies H3C MSR 50 - Manual (Page 237)

216
Figure 224 DHCP Enable
Table 106 Configuration items
Item Description
DHCP Enable or disable DHCP globally.
Configuring DHCP interface setup
1. Select Advanced > DHCP Setup from the navigation tree.
2. Click the DHCP Interface Setup tab.
The DHCP interface setup configuration page appears, as shown in
Figure 225 .
Figure 225 DHCP interface setup
3. Configure the DHCP interface setup as described in Table 107 .
4. Click Apply.
Table 107 Configuration items
Item Description
Interface Select an interface to be configured.
Type
Select a type for the interface, which can be:
• None—Upon receiving a DHCP request, the interface does not assign an IP
address to the requesting client nor serves as a DHCP relay agent to forward
the request.
• Server—Upon receiving a DHCP request, the interface assigns the
requesting client an IP address from the address pool.
• Relay—Upon receiving a DHCP request, the interface forwards the request
to an external DHCP server, which assigns an IP address for the requesting
client.
• Client—The interface uses DHCP to obtain an IP address.