H3C Technologies H3C MSR 50 - Manual (Page 542)

157
Before executing a traceroute operation, execute the ip ttl-expires enable command on intermediate
devices to enable the sending of ICMP timeout packets, and execute the ip unreachables enable
command on the destination device to enable the sending of ICMP destination unreachable packets.
To perform a traceroute operation:
1. Log in to the Web interface, and select Other > Diagnostic Tools from the navigation tree to enter
the traceroute operation page, as shown in
Figure 546 .
2. Enter the destination IP address or host name.
3. Click Start.
You can see the result in the Summary box.
Figure 546 Traceroute configuration page
Ping operation
The Web interface does not support IPv6 ping.
To perform a ping operation:
1. Select Other > Diagnostic Tools from the navigation tree.
2. Click the Ping tab, as shown in 3 .
3. Enter the destination IP address or host name.
4. Click Start.
You can see the result in the Summary box.