Configuring packet filtering for user group staff – H3C Technologies H3C MSR 50 User Manual
Page 329
308
Figure 321 Configuring bandwidth control to user groups staff and manager
2.
Select the staff user group.
3.
Enter 8 for the CIR.
4.
Click Apply.
A configuration progress dialog box appears.
5.
After the configuration process is complete, click Close.
6.
Select the manager user group.
7.
Enter 54 for the CIR.
8.
Click Apply.
A configuration progress dialog box appears.
9.
After the configuration process is complete, click Close.
Configuring packet filtering for user group staff
1.
Select Advanced > Security > Packet Filter, and then perform the configurations as shown in
.
This manual is related to the following products: