H3C Technologies H3C MSR 50 - Manual (Page 253)

232
The default DHCP Enable tab appears.
b. Select the Enable option in the DHCP field.
c. Click Apply.
Figure 239 DHCP enable
3. Create a DHCP server group:
a. Click the DHCP Interface Setup tab.
b. Select Ethernet0/1 from the Interface list.
c. Select the Relay option in the Type field.
d. Expand the Add DHCP Server Group node.
e. Enter 1 in the Group ID field.
f. Enter 10.1.1.1 in the Server IP Address field.
g. Click Apply.
Figure 240 DHCP server group creating