Creating a gre tunnel – H3C Technologies H3C MSR 50 User Manual
Page 411
26
Creating a GRE tunnel
1.
Select VPN > GRE from the navigation tree to enter the GRE tunnel configuration page, as shown
in
Figure 390 GRE tunnel configuration page
2.
Click Add to add a GRE tunnel, as shown in
Figure 391 Adding a GRE tunnel
Table 165 Configuration items
Item Description
Tunnel Interface
Specify the number of the tunnel interface.
IP/Mask
Specify the IP address and subnet mask of the tunnel interface.
IMPORTANT:
When configuring a static route on the tunnel interface, note that the destination IP
address of the static route must not be in the subnet of the tunnel interface.
Tunnel Source
IP/Interface
Specify the source IP address and destination IP address for the tunnel interface.
For the tunnel source address, you can input an IP address or select an interface. In
the latter case, the primary IP address of the interface will be used as the tunnel