Configuring mstp on a port, Configuring mstp on, A port – H3C Technologies H3C MSR 50 User Manual
Page 349
328
Configuring MSTP on a port
1.
From the navigation tree, select Advanced > MSTP > Port.
The MSTP Port Configuration page appears, as shown in
Figure 331 MSTP configuration of a port (1)
2.
Click the Operation icon
for a port.
The MSTP Port Configuration page of the port appears, as shown in
.
Figure 332 MSTP configuration of a port (2)
Table 146 Configuration items
Item Description
Port Number
Select the port you want to configure.
STP Status
Enable or disable STP on the port:
•
Enable—Enable STP on the port.
•
Disable—Disable STP on the port.
This manual is related to the following products: