H3C Technologies H3C MSR 50 - Manual (Page 286)

265
Configuring SNMPv1 or SNMPv2c
Task Remarks
Enabling the SNMP agent function
Required.
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP the agent function is disabled, all SNMP agent-related
configurations are removed.
Configuring an SNMP view
Optional.
After creating SNMP views, you can specify an SNMP view for
an SNMP group to limit the MIB objects that can be accessed by
the SNMP group.
Configuring an SNMP community Required.
Configuring the SNMP trap function
Optional.
Allows you to configure that the agent can send SNMP traps to
the NMS, and configure information about the target host of the
SNMP traps.
By default, an agent is allowed to send SNMP traps to the NMS.
Displaying SNMP packet statistics Optional.
Configuring SNMPv3
Task Remarks
Enabling the SNMP agent function
Required.
The SNMP agent function is disabled by default.
IMPORTANT:
If the SNMP agent function is disabled, all SNMP agent-related
configurations are removed.
Configuring an SNMP view
Optional.
After creating SNMP views, you can specify an SNMP view for
an SNMP group to limit the MIB objects that can be accessed by
the SNMP group.
Configuring an SNMP group
Required.
After creating an SNMP group, you can add SNMP users to the
group when creating the users. Therefore, you can realize
centralized management of users in the group through the
management of the group.
Configuring an SNMP user
Required.
Before creating an SNMP user, you need to create the SNMP
group to which the user belongs.
Configuring the SNMP trap function
Optional.
Allows you to configure that the agent can send SNMP traps to
the NMS, and configure information about the target host of the
SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.