Configuring a rule for an advanced ipv4 acl – H3C Technologies H3C MSR 50 User Manual
Page 262
241
Item
Description
Source Wildcard
wildcard, in dotted decimal notation.
Time Range
Select the time range during which the rule takes effect.
The time ranges available for selection must have been created at the CLI on the
router.
Configuring a rule for an advanced IPv4 ACL
Select Advanced > QoS Setup > ACL IPv4 from the navigation tree and then select the Advanced Config
tab to enter the rule configuration page for an advanced IPv4 ACL.
This manual is related to the following products: