H3C Technologies H3C MSR 50 - Manual (Page 288)

267
2. Configure the SNMP agent, as shown in Table 124 .
Table 124 Configuration items
Item Description
SNMP Specify to enable or disable the SNMP agent function.
Local Engine ID
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the SNMP
agent. If the engine ID when the user is created is not identical to the current engine
ID, the user is invalid.
Maximum Packet
Size Configure the maximum size of an SNMP packet that the agent can receive or
send.
Contact
Set a character string to describe the contact information for system maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to contact information for the device.
Location Set a character string to describe the physical location of the device.
SNMP Version Set the SNMP version run by the system.
Configuring an SNMP view
Select Advanced > SNMP from the navigation tree, and then click the View tab to enter the page as
shown in
Figure 265 .
Figure 265 View page
Creating an SNMP view
Click Add, and the Add View window appears as shown in Figure 266 . Type the view name and click
Apply, and then you enter the page as shown in Figure 267 .