H3C Technologies H3C MSR 50 - Manual (Page 518)

133
Item Description
Port Number.
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure the port is not used by other service.
ACL.
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service. Specify whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Certificate.
Configure the local certificate for the HTTPS service. The list displays the
certificate subjects. The optional certificates are configured on the VPN >
Certificate Management page. For more information, see "Managing
certificates."
IMPORTANT:
If no certificate is specified, HTTPS generates a self-signed certificate.
Port Number.
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure the port is not used by other service.
ACL.
Associate the HTTPS service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
Managing users
This module provides the following functions:
• Create a local user, and set the password, access level, and service type for the user.
• Set the super password for switching the current Web user access level to the management level.
• Switch the current Web user access level to the management level.
Creating a user
1. From the navigation tree, select System Management > Users.
2. Click the Create User tab.
The page for creating local users appears.
3. Create the user as described in Table 196 .
4. Click Apply.