Verifying the configuration, Configuring one-to-one binding between fxs and fxo, Network requirements – H3C Technologies H3C MSR 50 User Manual
Page 759
374
Figure 754 Hotline number configuration page
4.
Enter 0101001 in the Hotline Numbers field.
5.
Click Apply.
Verifying the configuration
If you dial the number 0755-2003 on phone 0755-2001, a connection is established to number 010-1001
at Router A.
Configuring one-to-one binding between FXS and FXO
Network requirements
•
Router A and Router B are connected over an IP network and a PSTN. Telephone A attached to
Router A can make calls to Telephone B attached to Router B over the IP network or the PSTN.
•
Usually, Telephone A makes calls to Telephone B over the IP network. In the case that the IP network
is unavailable, Router A sends calls from Telephone A through the bound FXO interface to
Telephone B over PSTN.
This manual is related to the following products: