H3C Technologies H3C MSR 50 - Manual (Page 75)

54
Item Description
Password
Displays whether a password is configured for authentication.
If the field displays null, no password is configured for authentication.
New Password Set or modify the password for authentication.
TCP-MSS Configure the TCP MSS on the interface.
MTU Configure the MTU on the interface.
Configuring a CT1/PRI interface
The CT1/PRI interface supports PPP connection mode. For more information about PPP, see " Configuring
an SA interface ."
When it is operating as a CT1 interface, all the timeslots (numbered 1 to 24) can be randomly divided
into groups. Each of these groups can form one channel set for which the system automatically creates an
interface logically equivalent to a synchronous serial interface. This interface supports link layer protocols
such as PPP, HDLC, FR, LAPB, and X.25, and network protocols such as IP and IPX.
To configure a CT1/PRI interface:
1. Select Interface Setup > WAN Interface Setup from the navigation tree.
2. Click the icon for the CT1/PRI interface.
3. Configure the CT1/PRI interface, as described in Table 34 .
Figure 34 Configuring a CT1/PRI interface