H3C Technologies H3C MSR 50 - Manual (Page 538)

153
2. View system logs.
To clear all system logs in the log cache, click Reset. To refresh system logs, click Refresh. To make
the syslog display page refresh automatically, set the refresh interval on the syslog configuration
page. For more information, see " Setting buffer capacity and refresh interval ."
Table 204 Syslog display items
Item Description
Time/Date Displays the time/date when the system log was generated.
Source Displays the module that generated the system log.
Level
Displays the severity level of the system log. The information is classified into eight
levels by severity:
• Emergency—The system is unusable.
• Alert—Action must be taken immediately.
• Critical—Critical condition.
• Error—Error condition.
• Warning—Warning condition.
• Notification—Normal but significant condition.
• Information—Informational messages.
• Debug—Debug-level messages.
Digest Displays the summary of the system log.
Description Displays the content of the system log.
Setting the log host
1. Select Other > Syslog from the navigation tree,
2. Click the Loghost tab to enter the log host configuration page, as shown in Figure 544 .