Verifying the configuration – H3C Technologies H3C MSR 50 User Manual
Page 554
169
b.
Select 10 for VLAN ID.
c.
Enter 163.172.55.1 for IP Address.
d.
Enter 255.255.255.0 for Subnet Mask.
e.
Click Apply.
# Enable WiNet.
f.
Select WiNet from the navigation tree.
When WiNet is disabled, a dialog box Only the WiNet administrator supports the function
appears.
g.
Click OK.
Figure 562 Enabling WiNet
c.
Enter WiNet for WiNet Name.
d.
Click Advance Options.
e.
Enter 10 for Management VLAN.
f.
Enter 192.168.0.1 for IP Pool (Administrator IP).
g.
Select 255.255.255.0 for Mask of IP Pool.
h.
Click Build WiNet.
Verifying the configuration
After the preceding configuration is complete, log in to Device B via Ethernet 0/1, select WiNet from the
navigation tree to enter the WiNet Management page. You can view a WiNet topology diagram
comprising an administrator (Device B) and two members (Device A and Device C), and manage the
devices, as shown in
.