H3C Technologies H3C MSR 50 - Manual (Page 426)

41
Table 168 Configuration items
Item Description
Use IP network
Select this box to allow IP access to the resource.
If you select this item, you must configure an IP network resource for a website
and associate the IP network resource with the relevant users. When such a user
accesses the website from the SSL VPN Web interface, the system logs the user in
automatically to the website through the IP network resource.
If you do not select this item, users access the resource through the Web proxy
server.
Login Request Path
• When you select the IP network mode, this item specifies the path that the
system submits during single login. If you leave this field blank, the system uses
the address that is specified in the Website Address field.
• When the IP network mode is not selected, this item specifies the relative path
of the Web proxy website. If you leave this field blank, the SSL VPN system
uses the default page specified in the Default Page field.
Username Parameter
Name Specify the username parameter name that the system submits during automatic
login.
Password Parameter Name
Specify the password parameter name that the system submits during automatic
login.
Other parameters
Specify the other parameters for the system to submit during automatic login.
To add a parameter other than the username and password, click Add, enter the
parameter name and parameter value on the popup page and click Apply.
Another way to configure the single login function is as follows:
6. Click the icon of a resource on the Web proxy server resource list, as shown in Figure 404 .
7. Enter a username and a password (the password must be different from the username) on the
popup page, and click Apply.
The login page for the website in the resource pops up.
8. Enter the username and password again and log in.
A message will tell you that the single login function is configured successfully.
During this process, the system automatically gets the username parameter name and the password
parameter name. When the website login page requires parameters other than the username and
password, you cannot configure single login in this method.
Configuring TCP application resources
You can configure the following types of TCP application resources:
• Remote access service resources
• Desktop sharing service resources
• Email service resources
• Notes mail service resources
• Common TCP service resources