H3C Technologies H3C MSR 50 - Manual (Page 527)

142
• PeriodicInformTime
• CPE address
• CPE username
• CPE password
For the TR-069 mechanism, see Network Management and Monitoring Configuration Guide in H3C
MSR Series Routers Configuration Guides (V5).
Configuration procedure
The TR-069 parameters of CPE can be configured automatically through ACS remote management, and
also can be configured manually through Web, which is described in detail in this section.
To configure TR-069 manually:
1. From the navigation tree, select System Management > TR-069.
The TR-069 configuration page appears.
2. Configure TR-069 as described in Table 200 .
3. Click Apply.
Figure 535 TR-069 configuration page
Table 200 Configuration items
Item Description
TR-069
Enable or disable TR-069.
TR-069 configurations can take effect only after you enable TR-069.
ACS
URL. Configure the URL used by a CPE to initiate a connection to the ACS.
Username. Configure the username used by a CPE to initiate a connection to the ACS.
Password.
Configure the password used by a CPE to initiate a connection to the ACS.
You can specify a username without a password that is used in the authentication.
If so, the configuration on the ACS and that on the CPE must be the same.