H3C Technologies H3C MSR 50 - Manual (Page 186)

165
If you select Permit access to the Internet or Deny access to the Internet as the filtering type, the selected
filtering type will take effect as long as you add the MAC addresses for this type, no matter whether or
not you click Apply at the filtering type configuration area on the MAC Address Filtering page.
MAC address filtering configuration example
Network requirements
As shown in Figure 168 , internal users access the Internet through Router. Configure the MAC address
filtering function to deny users whose MAC addresses are 000d-88f8-0dd7 and 000d-88f7-b8d6 from
accessing the Internet.
Figure 168 Network diagram
Configuration procedure
# Configure the MAC address filtering function.
• Select Security Setup > MAC Address Filtering from the navigation tree and then perform the
following configurations, as shown in
Figure 169 .
Figure 169 Select MAC address filtering type
• Select Deny access to the Internet as the filtering type.
Internet
Router
Eth0/1
000d-88f8-0dd7
192.168.1.17
000d-88f7-b8d6
192.168.1.18