H3C Technologies H3C MSR 50 User Manual
Page 113
92
Figure 71 Configuring security settings
a.
Select the Open-System from the Authentication Type list.
b.
Select the Port Set option, and select mac-authentication from the Port Mode list.
c.
Select the MAC Authentication option, and select system from the Domain list.
d.
Click Apply.
3.
Enable the wireless service:
a.
Select Interface Setup > Wireless > Access Service from the navigation tree.
Figure 72 Enabling the wireless service
a.
Select the mac-auth option.
b.
Click Enable.
4.
Configure a MAC authentication list:
a.
Select Interface Setup > Wireless > Access Service from the navigation tree.
b.
Click MAC Authentication List.
This manual is related to the following products: