HP Array Controller HSG V8.7 Software User Manual
Page 499
Event Reporting: Templates and Codes
D–65
09C80101
Remote FLM detected an invalid facility to act upon.
n
Last Failure Parameter [0] contains the facility found.
09C90101
Remote FLM detected an invalid work type.
n
Last Failure Parameter [0] contains the work type found.
09CA0101
Remote FLM detected an invalid work type.
n
Last Failure Parameter [0] contains the work type found.
09CB0012
Remote FLM detected that the other controller has a facility lock manager at an
incompatible revision level with this controller.
n
Last Failure Parameter [0] contains the controller’s FLM revision.
n
Last Failure Parameter [1] contains the other controller’s FLM revision.
0A020100
ILF$CACHE_READY unable to allocate necessary DWDs.
0A030100
ILF$CACHE_READY buffers_obtained > non-zero stack entry count.
0A040100
ILF$CACHE_READY DWD overrun.
0A050100
ILF$CACHE_READY DWD underrun.
0A060100
ILF$CACHE_READY found buffer marked for other controller.
0A070100
CACHE$FIND_LOG_BUFFERS returned continuation handle > 0.
0A080100
Not processing a bugcheck.
0A090100
No active DWD.
0A0A0100
Current entry pointer is not properly aligned.
0A0B0100
Next entry pointer is not properly aligned.
0A0C0100
Next entry was partially loaded.
0A0E0100
Active DWD is not a DISK WRITE DWD as expected.
0A0F0100
New active DWD is not a DISK WRITE DWD as expected.
0A100100
Data buffer pointer is not properly aligned.
0A120100
Data buffer pointer is not properly aligned.
0A130100
Data buffer pointer is not properly aligned.
Table D–3
Last Failure Codes (Continued)
Code
Description