HP Array Controller HSG V8.7 Software - Manual (Page 170)

4–16 HSG80 User’s Guide
Spontaneous Event Log
Spontaneous event logs are displayed on the maintenance terminal
using %EVL formatting, as illustrated in the following examples:
Spontaneous event logs are reported to the host error log using SCSI
Sense Data Templates 01, 04, 05, 11, 12, 13, 14, 41, and 51. See
Appendix D, “Event Reporting: Templates and Codes,” for a more
detailed explanation.
CLI Event Reporting
CLI event reports are displayed on the maintenance terminal using
%CER formatting, as shown in the following example:
%EVL--HSG> --13-JAN-1946 04:32:47 (time not set)-- Instance Code: 0102030A (not
yet reported to host)
Template: 1.(01)
Power On Time: 0.Years, 14.Days, 19.Hours, 58.Minutes, 43.Seconds
Controller Model: HSG80
Serial Number: AA12345678 Hardware Version: 0000(00)
Software Version: V082G(50)
Informational Report
Instance Code: 0102030A
Last Failure Code: 011C0011
Last Failure Parameter[0.] 0000003F
%EVL--HSG> --13-JAN-1946 04:32:47 (time not set)-- Instance Code: 82042002 (not
yet reported to host)
Template: 19.(13)
Power On Time: 0.Years, 14.Days, 19.Hours, 58.Minutes, 43.Seconds
Controller Model: HSG80
Serial Number: AA12345678 Hardware Vesion: 0000(00)
Software Version: V082G(50)
Header type: 00 Header flags: 00
Test entity number: 0F Test number Demand/Failure: F8 Command: 01
Error Code: 0008 Return Code: 0005 Address of Error: A0000000
Expected Error Data: 44FCFCFC Actual Error Data: FFFF01BB
Extra Status(1): 00000000 Extra Status(2): 00000000 Extra Status(3): 00000000
Instance Code: 82042002
HSG>
%CER--HSG> --13-JAN-1946 04:32:20 (time not set)-- Previous controller-
operation terminated with display of solid fault code, OCP Code: 3F
HSG>