HP Array Controller HSG V8.7 Software - Manual (Page 208)

5–12 HSG80 User’s Guide
Installing a Controller and its Cache Module in a Dual-
Redundant Controller Configuration
Use the following steps to install a controller and its cache module.
1. Connect a PC or terminal to the operational controller. The controller to
which you’re connected is “this controller”; the controller whose cache
module you’re installing is the “other controller.”
2. Start FRUTIL with the following command:
RUN FRUTIL
FRUTIL displays the following:
Do you intend to replace this controller’s cache battery? Y/N
3. Enter N(o). FRUTIL displays the FRUTIL Main menu:
FRUTIL Main Menu:
1. Replace or remove a controller or cache module
2. Install a controller or cache module
3. Replace a PVA module
4. Replace an I/O module
5. Exit
Enter choice: 1, 2, 3, 4, or 5 ->
4. Enter option 2, Install a controller or cache module, from the FRUTIL
Main menu. FRUTIL displays the Install Options menu:
Install Options:
1. Other controller and cache module
2. Other controller module
3. Other cache module
4. Exit
Enter choice: 1, 2, 3, or 4 ->
5. Enter option 1, Other controller and cache module, from the Install
Options menu. FRUTIL display the following:
Insert both the slot A [or B] controller and cache module? Y/N