HP Array Controller HSG V8.7 Software - Manual (Page 459)

Event Reporting: Templates and Codes D–25
027A2201
The CACHEB0 Memory Controller failed Cache Diagnostics testing
performed on the other cache during a cache failover attempt. The
Memory Address field contains the starting physical address of the
CACHEB0 memory.
14
027B2201
The CACHEB1 Memory Controller failed Cache Diagnostics testing
performed on the other cache during a cache failover attempt. The
Memory Address field contains the starting physical address of the
CACHEB1 memory.
14
027C2201
The CACHEB0 and CACHEB1 Memory Controllers failed Cache
Diagnostics testing performed on the other cache during a cache failover
attempt. The Memory Address field contains the starting physical
address of the CACHEB0 memory.
14
027D5B01
The Mirrorset associated with the logical unit has gone inoperative due
to a disaster tolerance failsafe locked condition.
51
027E5B01
The command failed because the disaster tolerance mirrorset went
failsafe locked prior to command completion. The Information field of
the Device Sense Data contains the block number of the first block in
error.
51
027F2301
The CACHE backup battery has been declared bad. The battery did not
become fully charged within the expected duration. The Memory
Address field contains the starting physical address of the CACHEA0
memory.
12
02805B01
The command failed because the disaster tolerance mirrorset is failsafe
locked. The Information field of the Device Sense Data contains the
block number of the first block in error.
51
02815B01
The command failed because the disaster tolerance mirrorset is failsafe
locked. The Information field of the Device Sense Data contains the
block number of the first block in error.
51
02825C64
The Mirrorset associated with the logical unit has just had a membership
change such that disaster tolerance failsafe error mode can now be
enabled if desired.
51
02872301
The CACHE backup battery has exceeded the maximum number of deep
discharges. Battery capacity may be below specified values. The
Memory Address field contains the starting physical address of the
CACHEA0 memory.
12
02882301
The CACHE backup battery covering the mirror cache has exceeded the
maximum number of deep discharges. Battery capacity may be below
specified values. The Memory Address field contains the starting
physical address of the CACHEB1 memory.
12
Table D–1 Instance Codes (Continued)
Instance
Code
Description Template