HP Array Controller HSG V8.7 Software - Manual (Page 497)

Event Reporting: Templates and Codes D–63
08020100 No memory could be allocated for a NVFOC information packet.
08030101 Work received on the S_nvfoc_bque did not have a NVFOC work id.
n Last Failure Parameter[0] contains the id type value that was received on the
NVFOC work queue.
08040101 Unknown work value received by the S_nvfoc_bque.
n Last Failure Parameter[0] contains the unknown work value.
08060100 A really write command was received when the NV memory was not locked.
08070100 A write to NV memory was received while not locked.
08080000 The other controller requested this controller to restart.
08090010 The other controller requested this controller to shutdown.
080A0000 The other controller requested this controller to selftest.
080B0100 Could not get enough memory to build a FCB to send to the remote routines on the
other controller.
080C0100 Could not get enough memory for FCBs to receive information from the other
controller.
080D0100 Could not get enough memory to build a FCB to reply to a request from the other
controller.
080E0101 An out-of-range receiver ID was received by the NVFOC communication utility
(master send to slave send ACK). Last Failure Parameter[0] contains the bad id value.
080F0101 An out-of-range receiver ID was received by the NVFOC communication utility
(received by master). Last Failure Parameter[0] contains the bad id value.
08100101 A call to NVFOC$TRANSACTION had a from field (id) that was out of range for the
NVFOC communication utility.
n Last Failure Parameter [0] contains the bad id value.
08110101 NVFOC tried to defer more than one FOC send. Last Failure Parameter[0] contains
the master ID of the connection that had the multiple delays.
08140100 Could not allocate memory to build a workblock to queue to the NVFOC thread.
08160100 A request to clear the remote configuration was received but the memory was not
locked.
Table D–3 Last Failure Codes (Continued)
Code Description