HP Array Controller HSG V8.7 Software - Manual (Page 463)

Event Reporting: Templates and Codes D–29
03CD2002
Device port SCSI chip reported gross error during operation to a device
which is unknown to the controller. Note that in this instance the
Associated Additional Sense Code and Associated Additional Sense
Code Qualifier fields are undefined.
41
03CE2002
Non-SCSI bus parity error during operation to a device which is
unknown to the controller. Note that in this instance the Associated
Additional Sense Code and Associated Additional Sense Code Qualifier
fields are undefined.
41
03CF0101
Source driver programming error encountered during operation to a
device which is unknown to the controller. Note that in this instance the
Associated Additional Sense Code and Associated Additional Sense
Code Qualifier fields are undefined.
41
03D04002
A failure occurred while attempting a SCSI Test Unit Ready or Read
Capacity command to a device. The device type is unknown to the
controller. Note that in this instance the Associated Additional Sense
Code and Associated Additional Sense Code Qualifier fields are
undefined.
41
03D14002
The identification of a device does not match the configuration
information. The actual device type is unknown to the controller. Note
that in this instance the Associated Additional Sense Code, and
Associated Additional Sense Code Qualifier fields are undefined.
41
03D24402
SCSI bus errors during device operation. The device type is unknown to
the controller. Note that in this instance the Associated Additional Sense
Code and Associated Additional Sense Code Qualifier fields are
undefined.
41
03D3450A
During device initialization, the device reported the SCSI Sense Key NO
SENSE. This indicates that there is no specific sense key information to
be reported for the designated logical unit. This would be the case for a
successful command or a command that received CHECK CONDITION
or COMMAND TERMINATED status because one of the FM, EOM, or
ILI bits is set to one in the sense data flags field.
41
03D4450A
During device initialization, the device reported the SCSI Sense Key
RECOVERED ERROR. This indicates the last command completed
successfully with some recovery action performed by the target.
41
03D5450A
During device initialization, the device reported the SCSI Sense Key
NOT READY. This indicates that the logical unit addressed cannot be
accessed. Operator intervention may be required to correct this
condition.
41
Table D–1 Instance Codes (Continued)
Instance
Code
Description Template