HP Array Controller HSG V8.7 Software - Manual (Page 213)

Replacement Procedures 5–17
Caution The device ports must quiesce before removing the controller.
Failure to allow the ports to quiesce may result in data loss. Quiescing
may take several minutes.
ESD can easily damage a controller. Wear a snug-fitting, grounded
ESD wrist strap.
Note A countdown timer allows a total of two minutes to remove the
controller. If you exceed two minutes, “this controller” will exit
FRUTIL and resume operations.
9. Remove the hub cables from the “other controller.”
Note One or two hub cables may be attached, depending on the
configuration.
10. Disengage both retaining levers, remove the “other controller,” and
place this controller into an antistatic bag or onto a grounded antistatic
mat.
Once the controller is removed, FRUTIL displays the following:
Restarting all device ports. Please wait...
Device Port 1 restarted.
Device Port 2 restarted.
Device Port 3 restarted.
Device Port 4 restarted.
Device Port 5 restarted.
Device Port 6 restarted.
Do you have a replacement controller? Y/N
11. Enter N(o) if you don’t have a replacement controller and disconnect the
PC or terminal from the controller’s maintenance port.
Enter Y(es) if you have a replacement controller and want to install it
now. FRUTIL displays the following:
Insert the slot A [or B] controller? Y/N
Note If you entered Y(es) go to step 6 on page 5–19.