HP Array Controller HSG V8.7 Software - Manual (Page 494)

D–60 HSG80 User’s Guide
03980100 Failed to allocate expandable EMU static work structures.
03990100 Failed to allocate expandable EMU work entry.
039A0100 Failed to allocate expandable EMU FOC work entry.
039B0100 EMU request work queue corrupted.
039C0100 EMU response work queue corrupted.
039D0100 EMU work queue corrupted.
039E0100 EMU foc request work queue corrupted.
039F0100 EMU foc response work queue corrupted.
03A08093 A configuration or hardware error was reported by the EMU.
n Last Failure Parameter [0] contains the solid OCP pattern which identifies the
type of problem encountered.
n Last Failure Parameter [1] contains the cabinet ID reporting the problem.
n Last Failure Parameter [2] contains the SCSI Port number where the problem
exists (if port-specific).
03A28193 The EMU reported Terminator Power out of range.
n Last Failure Parameter [0] contains a bit mask indicating which SCSI Port
number(s) where the problem exists for cab 0. Bit 0 set indicates SCSI Port 1, Bit
1 set indicates SCSI port 2, etc.
n Last Failure Parameter [1] contains a bit mask indicating which SCSI Port
number(s) where the problem exists for cab 2.
n Last Failure Parameter [2] contains a bit mask indicating which SCSI Port
number(s) where the problem exists for cab 3.
04010101 The requester id component of the instance code passed to FM$REPORT_EVENT is
larger than the maximum allowed for this environment.
n Last Failure Parameter[0] contains the instance code value.
04020102 The requester’s error table index passed to FM$REPORT_EVENT is larger than the
maximum allowed for this requester.
n Last Failure Parameter[0] contains the instance code value.
n Last Failure Parameter[1] contains the requester error table index value.
Table D–3 Last Failure Codes (Continued)
Code Description