HP Array Controller HSG V8.7 Software - Manual (Page 491)

Event Reporting: Templates and Codes D–57
03390108 An unknown interrupt code was found in a device port’s DSPS register.
n Last Failure Parameter [0] contains the PCB port_ptr value.
n Last Failure Parameter [1] contains the PCB copy of the device port TEMP
register.
n Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
n Last Failure Parameter [3] contains the PCB copy of the device port DNAD
register.
n Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
n Last Failure Parameter [5] contains the PCB copy of the device port DSPS
register.
n Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/
SSTAT1/SSTAT0/DSTAT registers.
n Last Failure Parameter [7] contains the PCB copies of the device port LCRC/
RESERVED/ISTAT/DFIFO registers.
033C0101 An invalid code was seen by the error recovery thread in the er_funct_step field of the
PCB.
n Last Failure Parameter [0] contains the PCB er_funct_step code.
033E0108 An attempt was made to restart a device port at the SDP DBD.
n Last Failure Parameter [0] contains the PCB port_ptr value.
n Last Failure Parameter [1] contains the PCB copy of the device port TEMP
register.
n Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
n Last Failure Parameter [3] contains the PCB copy of the device port DNAD
register.
n Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
n Last Failure Parameter [5] contains the PCB copy of the device port DSPS
register.
n Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/
SSTAT1/SSTAT0/DSTAT registers.
n Last Failure Parameter [7] contains the PCB copies of the device port LCRC/
RESERVED/ISTAT/DFIFO registers.
Table D–3 Last Failure Codes (Continued)
Code Description