HP Array Controller HSG V8.7 Software - Manual (Page 493)

Event Reporting: Templates and Codes D–59
034A0100 Insufficient memory available for PUB allocation.
034B0100 Insufficient memory available for DS init buffer allocation.
034C0100 Insufficient memory available for static structure allocation.
034D0100 DS init DWDs exhausted.
034E2080 Diagnostics report all device ports are broken.
034F0100 Insufficient memory available for reselect target block allocation.
03500100 Insufficient memory available for command disk allocation.
03520100 A failure resulted when an attempt was made to allocate a DWD for use by DS CDI.
035A0100 Invalid SCSI message byte passed to DS.
035B0100 Insufficient DWD resources available for SCSI message passthrough.
03640100 Processing run_switch disabled for LOGDISK associated with the other controller.
03650100 Processing pub unblock for LOGDISK associated with the other controller.
03660100 No memory available to allocate pub to tell the other controller of reset to one if its
LUNs
03670100 No memory available to allocate pub to tell the other controller of a BDR to one if its
LUNs
036F0101 Either send_sdtr or send_wdtr flag set in a non-miscellaneous DWD.
n Last Failure Parameter [0] contains the invalid command class type.
03780181 In ds_get_resume_addr, the buffer address is non-longword aligned for FX access.
n Last Failure Parameter [0] contains the re-entry dbd address value.
03820100 Failed request for mapping table memory allocation.
03830100 Failed request pci 875 block memory allocation.
03850101 ds_alloc_mem called with invalid memory type Last Failure Parameter [0] contains
the invalid memory type.
03860100 ds_alloc_mem was unable to get requested memory allocated: NULL pointer returned.
038C0100 Insufficient memory available for completion dwd array allocation.
Table D–3 Last Failure Codes (Continued)
Code Description