HP Array Controller HSG V8.7 Software - Manual (Page 188)

4–34 HSG80 User’s Guide
The following tables detail the remaining portions of the Fibre Channel
Host Status Display. Table 4–10 includes the labels that report the
status of ports one and two, and Table 4–11 describes the Link Error
Counters.
Table 4–10 Fibre Channel Host Status Display- Port Status
Field Label Description
Topology LOOP
OFFLNE
Current Status DOWN
LOOP
STNDBY
Current ID/ALPA Controller ID
Tachyon Status This denotes the current state of the Tachyon,
or Fibre Channel control chip. See “Tachyon
Status,” page 4–36, for more detail.
Queue Depth Queue depth shows the instantaneous number
of commands at the controller port.
Busy/QFull RSP This field represents the total number of QFull/
Busy responses sent by the port.
Table 4–11 Fibre Channel Host Status Display- Link Error
Counters
Field Label Description
Link Downs This field refers to the total number of link
down/up transitions.
Soft Inits Soft initializations are the number of loop
initialization caused by this port.
Hard Inits Hard initializations indicate the number of
Tachyon chip resets.
Loss of Signals Loss of signals show the number of times the
Frame Manager detected a low-to-high
transition on the lnk_unuse signal.