HP Array Controller HSG V8.7 Software - Manual (Page 315)

CLI Commands B–43
CLEAR_ERRORS unit-number UNWRITEABLE_DATA
Clears an unwriteable data error on a unit.
It affects all partitions on the same container.
If a storageset or disk drive fails before its data has been written to it, the
controller reports an unwriteable data error. The CLEAR_ERRORS
UNWRITEABLE_DATA command removes the data from the cache and
clears the unwriteable data error.
Caution This command causes data loss.
Syntax
CLEAR_ERRORS unit-number UNWRITEABLE_DATA
Spell out UNWRITEABLE_DATA when using this command.
Parameters
unit-number
Identifies the unit having the unwriteable data error. The unit-number is
the name given to the unit when it was created with the ADD UNIT
command.
Example
Use the following command to clear the unwriteable data error on disk
unit D103:
CLEAR_ERRORS D103 UNWRITEABLE_DATA
See also
CLEAR_ERRORS CLI
CLEAR_ERRORS INVALID_CACHE
CLEAR_ERRORS LOST_DATA
CLEAR_ERRORS UNKNOWN
RETRY_ERRORS UNWRITEABLE_DATA