HP Array Controller HSG V8.7 Software - Manual (Page 386)

B–114 HSG80 User’s Guide
Table B–5 lists the valid EMU set-point temperatures in both
Fahrenheit and Celsius.
If any of the setpoints assigned to a slave EMU do not match the
corresponding setpoints assigned to the master EMU, the slave EMU
settings change to match the corresponding master EMU settings.
Refer to the enclosure documentation for detailed information about
setting the EMU temperature set points.
FANSPEED=HIGH
FANSPEED=AUTOMATIC (Default)
Sets the speed at which the fan operates.
Select FANSPEED=HIGH to force the fans in all connected cabinets to
operate at high speed continuously.
Select FANSPEED=AUTOMATIC to allow the EMU to control the fan
speed for the fans in all connected cabinets.
Table B–5 EMU Set Point Temperatures
ºC ºF ºC ºF ºC ºF ºC ºF ºC ºF
0 32 10 50 20 68 30 86 40 104
1 34 11 52 21 70 31 88 41 106
2 46 12 54 22 72 32 90 42 108
3 37 13 55 23 73 33 91 43 109
4 39 14 57 24 75 34 93 44 111
5 41 15 59 25 77 35 95 45 113
6 43 16 61 26 79 36 97 46 115
7 45 17 63 27 81 37 99 47 117
8 46 18 64 28 82 38 100 48 118
9 48 19 66 29 84 39 102 49 120