HP Array Controller HSG V8.7 Software - Manual (Page 496)

D–62 HSG80 User’s Guide
05010100 In recursive_nonconflict could not get enough memory for scanning the keyword
tables for configuration name conflicts.
06010100 The DUART was unable to allocate enough memory to establish a connection to the
CLI.
06020100 A port other than terminal port A was referred to by a set terminal characteristics
command. This is illegal.
06030100 A DUP question or default question message type was passed to the DUART driver,
but the pointer to the input area to receive the response to the question was NULL.
06040100 Attempted to detach unattached maintenance terminal.
06050100 Attempted output to unattached maintenance terminal.
06060100 Attempted input from output only maintenance terminal service.
06070100 The DUART was unable to allocate enough memory for its input buffers
06080000 Controller was forced to restart due to entry of a CNTRL-K character on the
maintenance terminal.
07010100 All available slots in the FOC notify table are filled.
07020100 FOC$CANCEL_NOTIFY() was called to disable notification for a rtn that did not
have notification enabled.
07030100 Unable to start the Failover Control Timer before main loop.
07040100 Unable to restart the Failover Control Timer.
07050100 Unable to allocate flush buffer.
07060100 Unable to allocate active receive fcb.
07070100 The other controller killed this, but could not assert the kill line because nindy on or in
debug. So it killed this now.
07080000 The other controller crashed, so this one must crash too.
07090100 A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory when
allocating VA Request Items.
08010101 A remote state change was received from the FOC thread that NVFOC does not
recognize.
n Last Failure Parameter[0] contains the unrecognized state value.
Table D–3 Last Failure Codes (Continued)
Code Description