HP Array Controller HSG V8.7 Software - Manual (Page 261)

Upgrading the Subsystem 6–15
Does the target device support only the
download microcode and save? HSUTIL detects that an unsupported device has been
selected as the target device. You must specify whether the
device supports the SCSI Write Buffer command’s download
and save function.
Should the code be downloaded with a
single write buffer command? HSUTIL detects that an unsupported device has been selected
as the target device. You must indicate whether to download
the firmware image to the device in one or more contiguous
blocks, each corresponding to one SCSI Write Buffer
command.
Table 6–1 HSUTIL Messages and Inquiries (Continued)
Message Description