HP Array Controller HSG V8.7 Software - Manual (Page 485)

Event Reporting: Templates and Codes D–51
02EF0102 A CLD is free when it should be allocated.
n Last Failure Parameter [0] contains the requesting entity.
n Last Failure Parameter [1] contains the CLD index.
02F00100 The controller has insufficient free resources for the configuration restore process to
obtain a facility lock.
02F10102 The configuration restore process encountered an unexpected non-volatile parameter
store format. The process cannot restore from this version.
n Last Failure Parameter [0] contains the version found.
n Last Failure Parameter [1] contains the expected version.
02F20100 The controller has insufficient free resources for the configuration restore process to
release a facility lock.
02F34083 A device read operation failed during the configuration restore operation. The
controller is crashed to prevent possible loss of saved configuration information on
other functioning devices.
n Last Failure Parameter [0] contains the disk port.
n Last Failure Parameter [1] contains the disk target.
n Last failure Parameter [2] contains the disk LUN.
02F44083 The calculated error detection code on the saved configuration information is bad. The
controller is crashed to prevent destruction of other copies of the saved configuration
information. Remove the device with the bad information and retry the operation.
n Last Failure Parameter [0] contains the disk port.
n Last Failure Parameter [1] contains the disk target.
n Last Failure Parameter [2] contains the disk LUN.
02F54083 The device saved configuration information selected for the restore process is from an
unsupported controller type. Remove the device with the unsupported information and
retry the operation.
n Last Failure Parameter [0] contains the disk port.
n Last Failure Parameter [1] contains the disk target.
n Last Failure Parameter [2] contains the disk LUN.
Table D–3 Last Failure Codes (Continued)
Code Description