beautypg.com

HP Array Controller HSG V8.7 Software User Manual

Page 458

background image

D–24

HSG80 User’s Guide

026E0001

The device specified in the Device Locator field has been reduced from
the Mirrorset associated with the logical unit. The nominal number of
members in the mirrorset has been decreased by one. The reduced device
is now available for use.

51

026F530A

The device specified in the Device Locator field failed to be added to the
mirrorset associated with the logical unit. The device will remain in the
Spareset.

51

02705401

The device specified in the Device Locator field failed to be added to the
mirrorset associated with the logical unit. The failed device has been
moved to the Failedset.

51

02710064

The mirrorset associated with the logical unit has had its nominal
membership changed. The new nominal number of members for the
mirrorset is specified in the Device Sense Data Information field.

51

02725101

The Mirrorset associated with the logical unit has gone inoperative.

51

02730001

The device specified in the Device Locator field had a read error which
has been repaired with data from another mirrorset member.

51

02745A0A

The device specified in the Device Locator field had a read error.
Attempts to repair the error with data from another mirrorset member
failed due to lack of alternate error-free data source.

51

02755601

The device specified in the Device Locator field had a read error.
Attempts to repair the error with data from another mirrorset member
failed due to a write error on the original device. The original device will
be removed from the mirrorset.

51

02773D01

The mirrored cache is not being used because the data in the mirrored
cache is inconsistent with the data in the primary cache. The primary
cache contains valid data, so the controller is caching solely from the
primary cache. The mirrored cache is declared “failed”, but this is not
due to a hardware fault, only inconsistent data. Mirrored writes have
been disabled until this condition is cleared. Note that in this instance the
Memory Address, Byte Count, FX Chip register, Memory Controller
register, and Diagnostic register fields are undefined.

14

02782301

The cache backup battery is not present. The Memory Address field
contains the starting physical address of the CACHEA0 memory.

12

02792301

The cache backup battery covering the mirror cache is not present. The
Memory Address field contains the starting physical address of the
CACHEB1 memory.

12

Table D–1

Instance Codes (Continued)

Instance

Code

Description

Template