HP Array Controller HSG V8.7 Software - Manual (Page 460)

D–26 HSG80 User’s Guide
02892301
The CACHE backup battery is near its end of life. The Memory Address
field contains the starting physical address of the CACHEA0 memory.
12
028A2301
The CACHE backup battery covering the mirror cache is near its end of
life. The Memory Address field contains the starting physical address of
the CACHEB1 memory.
12
03010101
No command control structures available for disk operation. Note that in
this instance the Associated Additional Sense Code and Associated
Additional Sense Code Qualifier fields are undefined.
41
03022002
SCSI interface chip command timeout during disk operation. Note that
in this instance the Associated Additional Sense Code and Associated
Additional Sense Code Qualifier fields are undefined.
41
03034002
Byte transfer timeout during disk operation. Note that in this instance the
Associated Additional Sense Code and Associated Additional Sense
Code Qualifier fields are undefined.
41
03044402
SCSI bus errors during disk operation. Note that in this instance the
Associated Additional Sense Code and Associated Additional Sense
Code Qualifier fields are undefined.
41
03052002
Device port SCSI chip reported gross error during disk operation. Note
that in this instance the Associated Additional Sense Code and
Associated Additional Sense Code Qualifier fields are undefined.
41
03062002
Non-SCSI bus parity error during disk operation. Note that in this
instance the Associated Additional Sense Code and Associated
Additional Sense Code Qualifier fields are undefined.
41
03070101
Source driver programming error encountered during disk operation.
Note that in this instance the Associated Additional Sense Code and
Associated Additional Sense Code Qualifier fields are undefined.
41
03080101
Miscellaneous SCSI Port Driver coding error detected during disk
operation. Note that in this instance the Associated Additional Sense
Code and Associated Additional Sense Code Qualifier fields are
undefined.
41
03094002
An unrecoverable disk drive error was encountered while performing
work related to disk unit operations.
51
030C4002
A Drive failed because a Test Unit Ready command or a Read Capacity
command failed.
51
030D000A Drive was failed by a Mode Select command received from the host. 51
030E4002 Drive failed due to a deferred error reported by drive. 51
030F4002 Unrecovered Read or Write error. 51
03104002 No response from one or more drives. 51
Table D–1 Instance Codes (Continued)
Instance
Code
Description Template