HP Array Controller HSG V8.7 Software - Manual (Page 238)

5–42 HSG80 User’s Guide
Replacing DIMMs
Use the following steps in “Removing DIMMs” and “Installing
DIMMs” to replace DIMMs in a cache module. The cache module may
be configured as shown in Figure 5–7 and Table 5–1.
Figure 5–7 Cache-Module Memory Configurations
Table 5–1 Cache Module Memory Configurations
Note If a DIMM fails, note which DIMM you need to replace based on
the diagram that displays on the console.
Memory DIMMs Quantity Location
64 MB 32 MB 2 MC0-1 and MC1-3
128 MB 32 MB 4 MC0-1, MC0-2,
MC1-3, and MC1-4
256 MB 128 MB 2 MC0-1 and MC1-3
512 MB 128 MB 4 MC0-1, MC0-2,
MC1-3, and MC1-4
MC0-1
MC0-2 MC1-3
MC1-4 MC0-1
MC0-2 MC1-3
MC1-4
CXO6288A
64MB configuration (2 x 32 MB)
256 MB configuration (2 x 128 MB) 128 MB configuration (4 x 32 MB)
512 MB configuration (4 x 128 MB)