HP Array Controller HSG V8.7 Software - Manual (Page 255)

Upgrading the Subsystem 6–9
6. Enter the software version of the patch to delete and press return. CLCP
displays the following:
Patch Number to delete ?
7. Enter the patch number to delete and press return. CLCP displays the
following:
The following patches have been selected for deletion:
Software Version - Patch #
xxxx xxxx
Do you wish to continue (y/n) [n] ?
8. Enter Y(es) and the patches are deleted. CLCP displays the following:
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ?
9. Enter option 0, Exit.
10. Press the controller’s reset button to restart the controller.
Listing Software Patches
Use the following steps to list software patches:
1. Connect a PC or terminal to the controller’s maintenance port.
2. Start CLCP with the following command:
RUN CLCP
CLCP displays the following:
Select an option from the following list:
Code Load & Patch local program Main Menu
0: Exit
1: Enter Code LOAD local program
2: Enter Code PATCH local program
3: Enter EMU Code LOAD utility
Enter option number (0..3) [0] ?