HP Array Controller HSG V8.7 Software - Manual (Page 498)

D–64 HSG80 User’s Guide
08170100 A request to read the next configuration was received but the memory was not locked.
08180100 Could not get enough memory for FLS FCBs to receive information from the other
controller.
08190100 An unlock command was received when the NV memory was not locked.
081A0100 Unable to allocate memory for remote work.
081B0101 Bad remote work received on remote work queue.
n Last Failure Parameter[0] contains the id type value that was received on the
NVFOC remote work queue.
081C0101 Bad member management work received.
n Last Failure Parameter[0] contains the bad member management value that was
detected.
081D0000 In order to go into mirrored cache mode, the controllers must be restarted.
081E0000 In order to go into nonmirrored cache mode, the controllers must be restarted.
081F0000 An FLM$INSUFFICIENT_RESOURCES error was returned from a FLM lock or
unlock call.
08200000 Expected restart so the write_instance may recover from a configuration mismatch.
08210100 Unable to allocate memory to setup NVFOC lock/unlock notification routines.
09010100 Unable to acquire memory to initialize the FLM structures.
09640101 Work that was not FLM work was found on the FLM queue. Bad format is detected or
the formatted string overflows the output buffer.
n Last Failure Parameter [0] contains the work found.
09650101 Work that was not FLM work was found on the FLM queue.
n Last Failure Parameter [0] contains the structure found.
09670101 Local FLM detected an invalid facility to act upon.
n Last Failure Parameter [0] contains the faciltiy found.
09680101 Remote FLM detected an error and requested the local controller to restart.
n Last Failure Parameter [0] contains the reason for the request.
Table D–3 Last Failure Codes (Continued)
Code Description