HP Array Controller HSG V8.7 Software - Manual (Page 489)

Event Reporting: Templates and Codes D–55
03330188 A parity error was detected by a device port while sending data out onto the SCSI bus.
n Last Failure Parameter [0] contains the PCB port_ptr value.
n Last Failure Parameter [1] contains the PCB copy of the device port TEMP
register.
n Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
n Last Failure Parameter [3] contains the PCB copy of the device port DNAD
register.
n Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
n Last Failure Parameter [5] contains the PCB copy of the device port DSPS
register.
n Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/
SSTAT1/SSTAT0/DSTAT registers.
n Last Failure Parameter [7] contains the PCB copies of the device port LCRC/
RESERVED/ISTAT/DFIFO registers.
03350188 The TEA (bus fault) signal was asserted into a device port.
n Last Failure Parameter [0] contains the PCB port_ptr value.
n Last Failure Parameter [1] contains the PCB copy of the device port TEMP
register.
n Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
n Last Failure Parameter [3] contains the PCB copy of the device port DNAD
register.
n Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
n Last Failure Parameter [5] contains the PCB copy of the device port DSPS
register.
n Last Failure Parameter [6] contains the PCB copies of the device port SSTAT2/
SSTAT1/SSTAT0/DSTAT registers.
n Last Failure Parameter [7] contains the PCB copies of the device port LCRC/
RESERVED/ISTAT/DFIFO registers.
Table D–3 Last Failure Codes (Continued)
Code Description